Compact dimensions - 4092x2250 mm
2 drilling groups for: 8 - horizontal spindles, 19 - vertical spindles (10 - top, 9 - bottom)
Milling spindle 3.5 kW
CNC drilling center KD-610R with two drilling groups on top and bottom for drilling from 6 sides (workpiece size 1000*2800 mm), a milling spindle is designed for high-precision drilling of through and blind holes in the ends and planes of furniture panels, which allows processing of any additive cards in one pass of the part. The machine is equipped with a milling unit for milling both simple straight grooves, for example a groove for the back wall or bottom of a drawer, and profile processing.
-Compact dimensions of the machine – only 4092x2250 mm
-Two drilling and milling groups (top and bottom)
-Milling unit as standard
-High processing speed: 100/90/50 m/min
-Drilling from 6 sides
-Drilling of small-sized parts from 70x35 mm
-Automatic lubrication of X and Y travel guides
-Visualization of processing of a double-sided additive card
-Batch drilling mode supported
-Ability to work with optimizer programs with additive cards, as well as print labels
-Scanner for reading additive cards using barcodes.
The machine has a small size - only 4092x2250 mm, making the machine suitable for small production areas.
Drilling on 6 sides . The machine has 2 drilling groups installed on: 8 horizontal spindles, 19 vertical spindles (10 on top, 9 on bottom). A 3.5 W milling unit is installed as standard.
3.5 kW milling spindle for cutting straight and curved grooves.
Two automatic clamps will allow you to securely fix a workpiece with a length from 70 mm to 2800 mm and perform fewer interceptions during drilling, which significantly increases the speed of the work cycle compared to machines with one clamp. Maximum speed to 100 m/min.
Batch drilling mode - processing of two parts at the same time with a mirror map.
Windows-based control panel with the ability to read barcodes, which allows you to increase machine productivity.
A scanner for reading barcodes is included in the basic equipment of the machine.
Ability to work with all popular programs for optimizing additive cards and label printing.
Easy movement of parts on the table occurs due to the air flow supplied by a special electric fan through the holes in the upper part of the table, thereby eliminating the possible appearance of scratches on the lower surface of the part.
Mobile plates in the drilling area allow for through milling.
Protecting the operator from injury.
The minimum workpiece size is 70x35 mm , which allows for the addition of small-sized parts.
The machine uses high-precision INVT servos, which ensures excellent accuracy and high productivity.
Sealed dust and moisture resistant cabinet with electronic components from the world's leading manufacturers is removed from the processing area, which prolongs the service life of electrical components and provides ease of maintenance.
| Drilling Center KD-610R | |
|---|---|
| Workpiece length, mm | 70-2800 |
| Workpiece width, mm | 35-1000 |
| Workpiece thickness, mm | 9-60 |
| Workpiece gripper travel speed (X), m/min | 100 |
| Maximum speed along the axis (Y), m/min | 90 |
| Maximum speed along the axis (Z), m/min | 50 |
| Number of drilling groups, pcs | 2 |
| Number of vertical spindles (upper group), pcs | 10 |
| Number of vertical spindles (lower group), pcs | 9 |
| Number of horizontal spindles, pcs | 8 |
| Milling unit, kW | 3,5 |
| Suction pipe diameter, mm | 1x150 + 1x200 |
| Full power, kW | 15,7 |
| Working pressure, MPa | 0.6 |
| Machine dimensions (LxWxH), mm | 4115x2250x2210 |
| Weight, kg | 2700 |
