The bed of the edge banding machine has the form of a rigid box with the necessary stiffening ribs, which guarantees the exact location of all nodes during the entire period of operation.

The machine is controlled by an industrial personal computer with a "Touch screen" system. The on/off icons of units and assemblies on the display are intuitive and do not require special skills to operate the machine.

Pressure beam with V-belt
Large contact with the workpiece, ensuring better press and stability.

Pre-milling Unit
Standard with 40mm milling cutter. Effectively mill off the defects left after cutting, ensuring a close sticking and improving edging results

Pre-heating Unit
Edge banding is stronger after preheating.

Pre-melt system
Equips with quick-change glue pot, glue level sensor, and EVA refilling system, easier for changeover and operation; EVA storage tank has large capacity, which enables a long time supplies, reducing times in manual refilling.

Intelligent positions and pressures
The pressing unit realizes intelligent positioning, automatically adjust the pressing position according to the thickness of the edge banding, reduce the impact of the pressing unit on the panel, and precisely fit the edge banding, which is smoother and more efficient.

.

Pneumatic end cutting
Motions along the precision linear guides, quickly cut off the excess edge at front and rear of the panel to ensure a smooth cut surface.

Intelligent positions and trims
Pneumatic switching between flat and R2 tool, equipped with a positioning motor, intelligently switch the position of the tool according to the thickness of the edge banding, and accurately realize various trimming.

Pneumatic corner rounding
Flexible switches for tapes with 2 different thicknesses, simple operation and stable running.

Intelligent positions and scraps
Switched pneumatically R1 and R2 tool , equipped with a positioning motor, which can intelligently switch the tool position according to the thickness of the edge banding, and accurately realize various scraping.

Flat Scraping Unit
The direct scraping unit is equipped with two hard-alloy straight knives (glue scraper), which carry out edge processing at the joints with the part. This operation removes excess glue and micro-roughness on the seams in the places where the edge is glued to the part.

Buffing unit
Cleaning chips off the panel surface on top & bottom.

Down Hogging (Option)
Hogging at the underside of the panel.

The centralized lubrication unit automatically lubricates the guides of the trimming unit.

Automatic lubrication of the conveyor is carried out by an electric pump.

The electrical components are made in accordance with CE standards.

The doors of the machine cabin are equipped with special sensors, which allows you to achieve safe work with the equipment.

The doors of the machine cabin are sheathed with a layer of noise insulation made from foamed polyurethane foam, which allows you to achieve comfortable work with the equipment.