The bed of the edge banding machine has the form of a rigid box with the necessary stiffening ribs, which guarantees the exact location of all nodes during the entire period of operation.

The machine is controlled by an industrial personal computer with a "Touch screen" system. The on/off icons of units and assemblies on the display are intuitive and do not require special skills to operate the machine.

The jointing unit is equipped with two high-frequency motors, which ensures high-quality processing of the end face of the material before gluing the edge. Pre-milling copes with the “step” from the scoring saw, chips. The pre-joint joint is equipped with 40 mm high diamond cutters (65 mm optional).

Preheating the end face of the workpiece for better adhesion.

The pressing unit consists of 5 rollers, which are driven by pneumatics, which guarantees an even distribution of forces on the edge during gluing. Of the 4 rollers, 2 rollers have a different cone, which ensures the distribution of the clamping force over the thickness of the part. 2 cylindrical rollers apply pressure throughout the thickness of the part, and 3 conical rollers are concentrated on the lower and upper parts of the part. The powerful pneumatic cylinder of the pre-cutting knife handles the thick edge well.

The machine is equipped with 2 upper glue tanks , which is necessary for working with different colors of glue and two pre-cutting units . 2 glue baths allow for a short time to reconfigure the machine to work with the desired glue bath (with light or dark glue). There is no need to dismantle and clean the glue bath when switching to a different color of glue. Top glue baths with pre-melt glue, capacity 5 litres. Glue is dosed and does not overheat during machine downtime. The viewing window allows you to control the presence of glue. Warm-up time and readiness for work 15 minutes.

The machine is equipped with automatic pneumatic loading of granulated glue . At the bottom of the machine frame there is a large hopper for 12.5 kg from which, through the air flow, the granules are transported to the upper hopper with pre-melt.

The end trimming unit is equipped with two high-frequency electric motors, and the movement of the saw units is carried out along special linear guides. The unit is equipped with an automatic lubrication system for the guides.

The milling unit consists of two high-frequency electric motors equipped with diamond radius cutters , which allow processing edge material with a thickness of 0.4 - 3.0 mm. The part is tracked by two large round cams (on each motor) mounted on a floating assembly, this design prevents scrap during milling. The first milling unit is equipped with cutters with a radius of 2 mm, the second milling unit is equipped with cutters with a radius of 1 mm. Each milling unit is set to two edge thicknesses and is switched from the control panel.

The rounds (profiling) unit is equipped with four high-speed motors and successfully runs at a speed of 26 m/min. The unit is equipped with diamond radius cutters. There are four schemes of node operation.

The first and second scraping units are equipped with two carbide radius knives, which, after milling the edge, remove a thin layer from the milled part of the edge and remove the kinematic wave, as a result we get a smooth machined surface. On the first node the radius of the knife is 2 mm, on the second node the radius of the knife is 1 mm. The nodes are switched on from the control panel of the machine.

Radial scraping units are equipped with mechanisms for pneumatic reconfiguration from the remote control to a different edge thickness and a mechanism for dividing edge residues along the length, for their more efficient removal.

The direct scraping unit is equipped with two hard-alloy straight knives (glue scraper), which carry out edge processing at the joints with the part. This operation removes excess glue and micro-roughness on the seams in the places where the edge is glued to the part.

A double polishing unit polishes the processed part of the edge, high quality is achieved through an oscillation system driven by pneumatic cylinders. To give the finishing gloss to the edge, a unit for applying polishing liquid is installed.

The grooving milling unit is equipped with a carbide-tipped grooving saw for milling the groove under the back wall. One of three options for positioning the milling unit is possible: for milling a groove from above (T), from below (H) or at the end (L) of the part.

High-precision adjustment counter on machine nodes.

2 edge feed magazines simplify and speed up the process of changing edges and changing thickness, size and color.

2 edge feed magazines simplify and speed up the process of changing edges and changing thickness, size and color.

The encoder on the mechanism for raising/lowering the clamping traverse allows you to automatically position the traverse to the thickness of the part set on the control panel.

The centralized lubrication unit automatically lubricates the guides of the trimming unit.

The electrical components are made in accordance with CE standards.

The doors of the machine cabin are sheathed with a layer of noise insulation made from foamed polyurethane foam, which allows you to achieve comfortable work with the equipment.